Generating signals
21 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
I have been away from Matlab for awhile and will need to refresh myself. In the mean time I could use a little help getting restarted. I need analyze an output signal that consists of a binary signal that is added to a two tone interference signal.
The binary signal is; +1 for one unit of time starting a zero, -1 for two units of time then +1 for one unit of time, -1 for one unit of time and and finally +1 for one unit of time.
The interference signal is; .7cos(6pit)+.5cos(9pit+pi/4)
How would I go about generating these two signals, then adding them together? Thanks
0 Kommentare
Antworten (3)
Arturo Moncada-Torres
am 1 Sep. 2011
I assume that your binary signal is periodic (+1, -1, +1, -1, ...). You would have to do something like this:
% Sampling characteristics.
fs = 1000; % [Hz]
Ts = 1/fs; % [s]
t = 0 : Ts : 10-Ts; % Time vector.
% Signals' amplitudes.
a1 = 0.7;
a2 = 0.5;
% Signals' frequencies [rad].
f1 = 6*pi;
f2 = 9*pi;
% Signals' phase [rad].
theta1 = 0;
theta2 = pi/4;
% Create the signals.
signal1 = a1 * cos((f1.* t) + theta1);
signal2 = a2 * cos((f2.* t) + theta2);
signal = signal1 + signal2;
% Create noise.
noise = zeros(1, numel(t));
for ii = 1:numel(noise)
if mod(ii, 2) == 0
noise(ii) = 1;
elseif mod(ii, 2) == 1
noise(ii) = -1;
end
end
% Pollute signal.
signalNoise = signal + noise;
% Plots
figure();
subplot(3,1,1);
plot(t, signal1);
ylim([-1.5 1.5]);
subplot(3,1,2);
plot(t, signal2);
ylim([-1.5 1.5]);
subplot(3,1,3);
plot(t, signal);
ylim([-1.5 1.5]);
figure();
subplot(3,1,1);
plot(t, noise);
ylim([-1.5 1.5]);
subplot(3,1,2);
plot(t, signal);
ylim([-1.5 1.5]);
subplot(3,1,3);
plot(t, signalNoise);
ylim([-1.5 1.5]);
Try it and let me know if it works.
0 Kommentare
Walter Roberson
am 1 Sep. 2011
resolution = 20;
oneunit = ones(1,resolution);
binarysignal = [oneunit, -oneunit, -oneunit, oneunit, -oneunit, oneunit];
t = ((1 : length(binarysignal)) - 1) ./ resolution;
interference = 0.7*cos(6*pi*t) + 0.5 * cos(9*pi*t + pi/4);
totalsignal = binarysignal + interference;
0 Kommentare
Siehe auch
Kategorien
Mehr zu Matched Filter and Ambiguity Function finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!