set axes limit manual
3 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
Hello.
I have used interpo2 funtion.
I had a matrix of 11x11 and now I have a matrix of 20x20.
I plot and the axes limit goes from 0 to 20. However the original value of X goes from 0 to 11.
How can I fix the value of the axes from o to 11?
Thank you in advance.
Regards,
María
0 Kommentare
Antworten (3)
Cris LaPierre
am 18 Sep. 2021
Can you share your code? It sounds like you are not providing an x input to your plot command. If not, MATLAB is using the index of the number in the vector as the X value. The simplest fix is to specify X and Y coordinates in your plot command.
X = 0.5:.5:10;
Y = 1:20;
% plot(y)
plot(Y)
% plot(x,y)
hold on
plot(X,Y)
hold off
legend(["Just Y","(X,Y)"])
0 Kommentare
Cris LaPierre
am 18 Sep. 2021
Ah, you actually meant 11x11 and 20x20. I had figured that was just a typo based on the question. imagesc is going to use row number for Y and column number for X by default. Use the following syntax to specify different values.
This seems to put the axes back into XY mode, meaning (0,0) is the bottom left corner. In images, (0,0) is the top left corner. Here's what the final solution might look like.
A= [ 0 0 0.149 0.524 0.717 0.268 0.275 0.340 0.330 0.943 0.623;
0 0 0.402 5.518 9.337 4.833 1.370 2.233 2.675 6.665 6.960;
0 0 0 0.710 6.047 6.910 1.925 1.117 1.186 3.558 7.161;
0 0 0 0 1.040 3.759 3.451 0.662 0.558 1.352 3.471;
0 0 0 0 0.042 0.985 2.449 0.700 0.325 0.618 1.732;
0 0 0 0 0 0.146 0.978 0.787 0.166 0.380 1.059;
0 0 0 0 0 0.015 0.179 0.427 0.164 0.228 0.516;
0 0 0 0 0 0 0.007 0.127 0.084 0.094 0.233;
0 0 0 0 0 0 0 0.032 0.052 0.084 0.089;
0 0 0 0 0 0 0 0.017 0.032 0.030 0.055;
0 0 0 0 0 0 0 0 0.007 0.040 0.052];
newNumberOfRows = 30; % set the number of rows interpolated rows you want
newNumberOfCols = 30; % set the number of columns interpolated rows you want
[x, y] = meshgrid(1:size(A,2), 1:size(A,1));
[xq, yq] = meshgrid(linspace(1, size(A, 2), newNumberOfCols), linspace(1, size(A, 1), newNumberOfRows));
newMatrix = interp2(x, y, A, xq, yq);
B=newMatrix;
% Show image with original X,Y limits.
imagesc('XData',[1 size(A,2)],'YData',[1 size(A,1)],'CData',B)
% Orient and scale the axes
axis ij
axis tight
% Compare to the original
figure
imagesc(A)
0 Kommentare
Siehe auch
Kategorien
Mehr zu Axis Labels finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!