Using Thorlabs DPC5500 with Matlab
4 Ansichten (letzte 30 Tage)
Ältere Kommentare anzeigen
Has anyone been able to interface the Thorlabs DPC5500 polarization controller with Matlab? The system uses VISA-TCPIP drivers, but after connecting the device, i cannot read any data out of the device. I used the NI I/O Trace application to look at the communications and it seems the viOpenDefaultRM session address is wrong. Is there a way of telling matlab to use specific session addresses? I suspect part of the problem is that matlab is using a generic type visa instrument, and there are no Thorlab instruments. Does anyone know of a good tutorial on how to create a new visa instrument in matlab? any information will be of great help.
0 Kommentare
Antworten (3)
Vinod
am 4 Jul. 2014
I think you need to look at the manual for the thorlabs device and see if the commands you are sending to get the instrument to respond are correct. I usually start with the *IDN? query and see if that works.
0 Kommentare
Vinod
am 14 Jun. 2014
Can you point me to the driver you are using? Also if you haven't already, take a look at the documentation on using drivers in MATLAB .
0 Kommentare
Siehe auch
Kategorien
Mehr zu Instrument Control Toolbox finden Sie in Help Center und File Exchange
Produkte
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!