While trying to load the Raspberrypi inversion Simulink model on to Raspberry Pi, got the error as seen in the below image. Someone please suggest any solution?

Answer 1

[Murat Belge]

I am guessing that you have run out of space on your Raspberry Pi. Did you expand the file system on the SD card after installing the support package firmware? If you did not do so, do the following:

In MATLAB:

>> h = raspberrypi
>> h.openShell('ssh')

Once the PuTTY shell opens, login with your username and password. On the shell command line:

pi@raspberrypi-H3Lv0JbC7A ~ $ df -h

Filesystem      Size  Used Avail Use% Mounted on
rootfs          2.6G  2.2G  276M  89% /
/dev/root       2.6G  2.2G  276M  89% /
devtmpfs        180M     0  180M   0% /dev
tmpfs            38M  220K   38M   1% /run
tmpfs           5.0M     0  5.0M   0% /run/lock
tmpfs            75M     0   75M   0% /run/shm
/dev/mmcblk0p1   56M   19M   38M  34% /boot

Look at how much space is used on rootfs. If it says %99 or something similar, you are running out of disk space. To fix disk space issues, first delete unused files/directories in your home folder (typically /home/pi). You should also try expanding the file system to fill-up your SD card. To do this, execute raspi-config utility on the shell above:

pi@raspberrypi-H3Lv0JbC7A ~ $ sudo raspi-config

You will see an option called "Expand filesystem" on the menu. Pick this item and follow instructions.

[Seregei Zagvozkin]

What username and password I need for login?

[Murat Belge]

The default user name is "pi" and the default password is "raspberry".