Install Support for Raspberry Pi Hardware
Add support for Raspberry Pi® hardware to the MATLAB® product by installing the MATLAB Support Package for Raspberry Pi Hardware.
This process installs the following items on your host computer:
Third-party software development tools
When you complete this installation, you can use MATLAB commands to control and retrieve data from Raspberry Pi hardware and peripherals.
The Raspberry Pi hardware is also referred to as a board or as target hardware.
Raspberry Pi Operating System Requirements
You can set up your Raspberry Pi hardware using any 32-bit Raspberry Pi Linux® operating system on your Raspberry Pi, namely Stretch, Buster or Bullseye.
Install, Update, or Uninstall Support Package
Install Support Package
On the MATLAB Home tab, in the Environment section, select Add-Ons > Get Hardware Support Packages.
In the Add-On Explorer window, click the support package and then click Install.
Update Support Package
On the MATLAB Home tab, in the Resources section, select Help > Check for Updates.
Uninstall Support Package
On the MATLAB Home tab, in the Environment section, click Add-Ons > Manage Add-Ons.
In the Add-On Manager window, find and click the support package, and then click Uninstall.
Before starting the hardware setup process, please install an operating system on to the SD card of your Raspberry Pi. You can do so by using the Raspberry Pi Imager utility or by manually installing an operating system image. For more information, refer to the Raspberry Pi documentation (Setting up your Raspberry Pi).
Hardware boards and devices supported by MathWorks® require additional configuration and setup steps to connect to MATLAB and Simulink®. Each support package provides a hardware setup process that guides you through registering, configuring, and connecting to your hardware board.
If the support package is already installed, you can start the hardware setup by opening the Add-On Manager.
In the Add-On Manager, start the hardware setup process by clicking the Setup button, .
After starting, the Hardware Setup window provides instructions for configuring the support package to work with your hardware.
Follow the instructions on each page of the Hardware Setup window. When the hardware setup process completes, you can open the examples to get familiar with the product and its features.