Main Content

Thyristor Static Behavior Validation

This example shows validation of the static behavior of the Thyristor block against its mask values. Mask values are closely related to datasheet values, and the thyristor block uses these values to calculate the coefficients of the equations used to model it.

The model can be configured to run four separate tests: gate trigger, latch current, on state, and off state. Use the hyperlinks in the model to select the desired test. Each subsystem variant contains more information on the test that is run.


Simulation Results from Simscape Logging

Gate Trigger Test

Latch Current Test

On-State Test

Off-State Test