release
Release JTAG cable resource
Syntax
Description
release(
releases the JTAG cable resource,
freeing the cable for use to reprogram the FPGA. After initialization, the AXI manager
object, mem
)mem
, holds the JTAG cable resource, and other programs cannot
access that JTAG cable. When you have an active AXI manager object, FPGA programming over
JTAG fails. Call the release
object function before reprogramming the
FPGA.
Examples
Access Memory on SoC Hardware Board from MATLAB
For this example, you must have a design running on a hardware board connected to the MATLAB® host machine.
Create a MATLAB AXI manager object. The object connects with the hardware board and confirms
that the IP is present. You can create the object with a vendor name or an
socHardwareBoard
object.
mem = socAXIManager('Xilinx');
Write and read one or more addresses with one command. By default, the functions auto-increment the address for each word of data. For instance, write ten addresses, then read the data back from a single location.
writememory(mem,140,[10:19]) rd_d = readmemory(mem,140,1)
rd_d = uint32 10
Now, read the written data from ten locations.
rd_d = readmemory(mem,140,10)
rd_d = 1×10 uint32 row vector 10 11 12 13 14 15 16 17 18 19
Set the BurstType
property to 'Fixed'
to turn
off the auto-increment and access the same address multiple times. For instance, read the
written data ten times from the same address.
rd_d = readmemory(mem,140,10,'BurstType','Fixed')
rd_d = 1×10 uint32 row vector 10 10 10 10 10 10 10 10 10 10
Write incrementing data ten times to the same address. The final value stored in address
140
is 29
.
writememory(mem,140,[20:29],'BurstType','Fixed') rd_d = readmemory(mem,140,10)
rd_d = 1×10 uint32 row vector 29 11 12 13 14 15 16 17 18 19
Alternatively, specify the address as a hexadecimal string. To cast the read data to a
data type other than uint32
, use the OutputDataType
property.
writememory(mem,'1c',[0:4:64]) rd_d = readmemory(mem,'1c',16,'OutputDataType',numerictype(0,6,4))
rd_d = Columns 1 through 10 0 0.2500 0.5000 0.7500 1.0000 1.2500 1.5000 1.7500 2.0000 2.2500 Columns 11 through 16 2.5000 2.7500 3.0000 3.2500 3.5000 3.7500 DataTypeMode: Fixed-point: binary point scaling Signedness: Unsigned WordLength: 6 FractionLength: 4
When you are done accessing the board, release the JTAG connection.
release(mem)
Input Arguments
mem
— JTAG connection to AXI manager IP running on hardware board
socAXIManager
object
JTAG connection to AXI manager IP running on your hardware board, specified as an
socAXIManager
object.
Version History
Introduced in R2019a
See Also
MATLAB-Befehl
Sie haben auf einen Link geklickt, der diesem MATLAB-Befehl entspricht:
Führen Sie den Befehl durch Eingabe in das MATLAB-Befehlsfenster aus. Webbrowser unterstützen keine MATLAB-Befehle.
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
How to Get Best Site Performance
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)