Select the diagnostic action to take if the model attempts to write data to a data store twice in succession in the current time step.
Use local settings
For each local data store (defined by a Data Store Memory block or
in a model workspace) use the setting specified by the block. For each
global data store (defined by a
in the base workspace) disable the diagnostic.
Disables this diagnostic for all data stores accessed by the model.
Enable all as warnings
Displays diagnostic as a warning at the MATLAB® command line.
Enable all as errors
Halts the simulation and displays the diagnostic in an error dialog box.
During model referencing simulation in accelerator and rapid
accelerator mode, if the Detect write after write parameter
is set to
Enable all as warnings,
all as errors, or
Use local settings, Simulink® temporarily
changes the setting to
You can use the Model Advisor to identify referenced models for which Simulink changes configuration this parameter setting during accelerated simulation.
In the Simulink Editor, select Analysis > Model Advisor.
Select By Task.
Run the Check diagnostic settings ignored during accelerated model reference simulation check.