Verbundene IO-Simulation
Verbinden Sie Ihr Simulink®-Modell direkt mit der unterstützten Arduino®-Hardware für den Live-I/O-Datenaustausch für Rapid Prototyping.
Die Simulation mit verbundenen IO ist ein Zwischenschritt im Workflow des Model-Based Design, der die Lücken zwischen Simulation und Code-Generierung schließt. Damit kann Ihr Simulink-Modell mit der Arduino-Hardware kommunizieren, bevor Sie das Modell bereitstellen.
Modelleinstellungen
Themen
- Communicate with Hardware Using Connected IO
Get data from hardware peripherals before deploying the Simulink model on the hardware.
- Set Up a Wi-Fi TCP/IP Connection with Connected IO in Simulink
Establish a Wi-Fi TCP/IP connection and simulate model in the connected IO mode.
- Set Up a Wi-Fi UDP Connection with Connected IO in Simulink
Establish a Wi-Fi® UDP connection and simulate model in connected IO mode.
- Measure Servo Motor Shaft Angle Using Device Driver Block in Connected I/O
Enable Connected I/O on a Simulink System object™ block that contains hardware-specific code allowing access to hardware-specific features.