Fault Outport

Output signals from fault behaviors

Since R2023b

• 

Libraries:
Simulink Fault Analyzer / Fault Port Blocks

Description

Fault Outport blocks link signals from a model of a fault behavior to an external model. You can use these blocks to output signal data to Simulink^® and System Composer™ models.

Use these blocks only in Fault Subsystem blocks. Each Fault Subsystem block can contain only one Fault Outport block.

Examples

Define Fault Behaviors

Add faults with custom behaviors and modify the fault trigger.

Open Live Script

Define Trigger Properties

Adjust when and how faults are injected by defining triggers.

Open Live Script

Run Fault Simulations and View Results

Generate fault simulation results with interactive and programmatic commands.

Open Live Script

Ports

Input

Port_1 — Output fault behavior

scalar | vector | matrix

Output from behavior to model, specified as a scalar, vector, or matrix. Connect to this block to represent the introduced behavior in another model.

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64 | Boolean | string | fixed point | enumeration | bus

Block Characteristics

Data Types	Boolean | bus | double | enumerated | fixed point | half | integer | single | string
Direct Feedthrough	no
Multidimensional Signals	yes
Variable-Size Signals	no
Zero-Crossing Detection	no

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Version History

Introduced in R2023b