Utilities
Memory operation blocks support all STM32 processors.
Blocks
| Byte Pack | Convert input signals to uint8 vector |
| Byte Unpack | Convert uint8 vector to input signals |
| Byte Reversal | Reverse order of bytes in input word |
| CAN Pack | Pack individual signals into CAN message |
| CAN Unpack | Unpack individual signals from CAN messages |
| CAN FD Pack | Pack individual signals into message for CAN FD bus |
| CAN FD Unpack | Unpack individual signals from CAN FD messages |
| Memory Copy | Copy data from and to memory section |
| Idle Task | Create free-running task (Since R2024a) |
| Protocol Encoder | Encode input data into a uint8 byte stream by specifying the packet structure (Since R2023a) |
| Protocol Decoder | Decode a uint8 byte stream by specifying the packet structure (Since R2023a) |
| Execution Profiler | Profile execution time of functions using either DWT Timer, GPIO or Timer measurement modes (Since R2025a) |
Topics
- Configure STM32 Processor-Based Boards using STM32CubeMX with Simulink
Configure the STM32 Processors-Based Boards to use STM32CubeMX project with Simulink.
- Set Up Scheduling Options for STM32 Processor-Based Boards
Setting up scheduling options for STM32 processor based boards.
- STM32CubeMX Configuration for Voltage Mode Control
Instructions for STM32CubeMX configuration.
Featured Examples
Signal Monitoring and Parameter Tuning of Generated PWM Output
Use PWM Output block in a Simulink® model to generate PWM signals using Embedded Coder® Support Package for STMicroelectronics® STM32 Processors.
Voltage Mode Control of DC-DC Buck Converter and Boost Converter Using STMicroelectronics STM32 Processor
Implement a DC-DC buck converter or Boost Converter control system using the B-G474E-DPOW1 Discovery kit for Embedded Coder® Support Package for STMicroelectronics® STM32 Processors.
Using Hardware Interrupt Block to Create an ISR on STMicroelectronics STM32 Processor Based Boards
Use a Hardware Interrupt block to create an interrupt service routine (ISR) in the generated code for Embedded Coder® Support Package for STMicroelectronics® STM32 Processors Based Boards.
