Main Content

Baud rate

Baud rate of serial port on host computer and target hardware

expand all in page

Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Operating system/scheduler

Description

The Baud rate parameter sets the baud rate of the serial port on the host computer and target hardware. This setting is for the serial connection between the Texas Instruments® Hercules RM57Lx Launchpad hardware board and host computer.

The Baud rate selection also appears on the External Mode tab.

Dependencies

None

Settings

115200 (default) | 300 | 1200 | 2400 | 4800 | 9600 | 14400 | 19200 | 28800 | 38400 | 57600 | 76800 | 230400 | 460800

Set the baud rate of the serial port on the host computer and target hardware.

Examples

expand all

  1. In the Simulink® Editor, select Simulation > Model Configuration Parameters.

  2. In the Configuration Parameters dialog box, click Hardware Implementation.

  3. Set the Hardware board parameter to TI Hercules RM57Lx Launchpad and click Apply.

    The parameter values under Hardware board settings are automatically populated to their default values.

  4. From the Serial connectivity group, select a Baud rate and click Apply.

  5. Click OK to close the dialog box.

Recommended Settings

No recommendation.

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2014b

See Also