Generate Code and Deploy the Model to the Hardware

Generate Code and Deploy the Model to the Hardware

Step 7 of 7 in Create a Digital Write Block

In the Simulink^® Editor from the Simulation tab, select Prepare > Model Settings.
In the Configuration Parameters dialog box, on the Hardware Implementation pane, set Hardware board to match your hardware board.
From the Hardware tab, select Monitor & Tune > Connect.
To build and run the model containing your System object™ on the hardware board, select Monitor & Tune > Run.

While the model runs on the hardware, the LED blinks on and off in 1 second intervals.

See Also

Create a Digital Read Block | Create the MATLAB System Block | Create a Digital Read Block | Block Mask | Simulation with Device Driver Blocks | Sharing Device Driver Blocks with Other Users

Create a Digital Write Block