Build action

Simulink Coder build operation for model

Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Target hardware resources / Build options

Description

The Build action parameter defines how Simulink^® Coder™ responds when you press Ctrl+B or click Build Model to build your model.

Dependencies

None

Settings

Build, load, and run (default) | Build

Build, load, and run

With this option, pressing Ctrl+B or clicking Build Model:

1. Generates code from the model

2. Compiles and links the code into an executable with libraries

3. Loads the executable and libraries into the ARM^® Cortex^®-A9 hardware boards or QEMU

4. Runs the executable in the ARM Cortex-A9 hardware boards or QEMU

Build

With this option, pressing Ctrl+B or clicking Build Model:

1. Generates code from the model

2. Compiles and links the code into an executable with libraries

This option does not load and run the executable on the ARM Cortex-A9 hardware boards or QEMU.

Examples

Select Build Action

1. In the Simulink Editor, select Simulation > Model Configuration Parameters.

2. In the Configuration Parameters dialog box, click Hardware Implementation.

3. Set the Hardware board parameter to ARM Cortex-A9 (QEMU) and click Apply.

   The parameter values under Hardware board settings are automatically populated to their default values.

4. From the Build options group, select a Build action from the drop down list and click Apply.

5. Click OK to close the dialog box.

Recommended Settings

Application	Setting
Debugging	Build_load_and_run
Traceability	No impact
Efficiency	No impact
Safety precaution	No impact

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2014b