Prototype DSP HDL Algorithms on Hardware
Support packages such as the HDL Coder™ Support Package for Xilinx® RFSoC Devices enable you to design, prototype, and verify practical digital signal processing systems on hardware.
Use an Xilinx RFSoC board as an I/O peripheral to transmit and receive real-time arbitrary waveforms using MATLAB® System objects or Simulink® blocks.
Acquire high-bandwidth signals by using burst mode.
Run signal processing application examples to get started with targeting your designs to hardware.
In Simulink, customize and prototype DSP algorithms. Target only the FPGA fabric of the device, or deploy partitioned hardware-software co-design implementations across the ARM® processor and the FPGA fabric of the device.
The Polyphase Channelizer (HDL Coder Support Package for Xilinx RFSoC Devices) example shows how to use the Channelizer block to process incoming analog-to-digital converter (ADC) samples and produce a spectrum that has 512 MHz of bandwidth. The Pulse-Doppler Radar Using Xilinx RFSoC Device (SoC Blockset Support Package for Xilinx Devices) example shows how to use the Discrete FIR Filter block in a pulse-Doppler radar system targeted on the Xilinx Zynq® UltraScale+™ RFSoC evaluation kit.
How to Install Support Packages
A support package is an add-on that enables you to use a MathWorks® product with specific third-party hardware and software. Support packages use the license of the base product. For instance, HDL Coder Support Package for Xilinx RFSoC Devices requires a license for HDL Coder.
Install support packages using the MATLAB Add-Ons menu. You can also use the Add-Ons menu to update installed support package software or update the firmware on third-party hardware.
To install support packages, on the MATLAB Home tab, in the Environment section, select Add-Ons > Get Hardware Support Packages. You can filter this list by selecting categories (such as hardware vendor or application area) or by performing a keyword search.
Search the Add-Ons list for these support packages:
HDL Coder Support Package for Xilinx RFSoC Devices
SoC Blockset™ Support Package for Xilinx Devices
HDL Coder Support Package for Intel® SoC Devices
HDL Coder Support Package for Xilinx Zynq® Platform
HDL Coder Support Package for Intel FPGA Boards
Embedded Coder® Support Package for Xilinx Zynq Platform (needed only for hardware-software co-design)
Embedded Coder Support Package for Intel SoC Devices (needed only for hardware-software co-design)
When the support package installation is complete, you must set up the host computer and radio hardware. For Windows® systems, the installer provides guided setup steps. For Linux® systems, the installer links to manual setup instructions.
- Xilinx RFSoC Devices
- Pulse-Doppler Radar Using Xilinx RFSoC Device (SoC Blockset Support Package for Xilinx Devices)
- Polyphase Channelizer (HDL Coder Support Package for Xilinx RFSoC Devices)