Beantwortet
Can't import cad assembly parameters when using smimport()
Hi - this page tells you which versions of CAD software support a connection with Simscape Multibody Link: https://www.math...

fast 4 Jahre vor | 0

Beantwortet
The part file I imported from solidworks is not visible either.
An XML file is not CAD geometry. The XML file which was exported from SolidWorks defines how the parts are connected to each ot...

fast 4 Jahre vor | 0

Beantwortet
how to visualize the impact of velocity on Force/torque and vice versa on a simscape multibody mechanism
One method of visualizing forces and torques is to use the variable solid blocks. You can vary the length of the cylinder, bric...

fast 4 Jahre vor | 0

| akzeptiert

Beantwortet
How to make a model realize a specific pattern ?
This sounds like an inverse kinematics function. You know where the "end effector" (in this case the end of the stick) is suppo...

fast 4 Jahre vor | 0

Beantwortet
Validate Simscape Double Pendulum model with Lagrange Matlab Code
Theta2 starts deviating noticeably within the first 0.1 seconds, and Theta1 shows deviations right away as well. The general be...

fast 4 Jahre vor | 0

Beantwortet
How to move wheels on plane in Simscape Multibody
I tried to download your files, but Google said they are not there. Depending on how you modeled the system and contact, there ...

fast 4 Jahre vor | 0

Beantwortet
How to make the model not jump away when the floor-feet contact is established ?
Hi Nayla - there are two changes you should make to your model to make it work. I have have made the changes and attached it he...

fast 4 Jahre vor | 1

| akzeptiert

Beantwortet
Why does spring-damper element move solid?
When you insert the Spring and Damper force block, the brick is free to move in space, as there is nothing constraining it. Wit...

fast 4 Jahre vor | 0

Beantwortet
Simscape modeling of bristle roller
Interesting question! It depends how much detail you want. Abstract: If your roller is spinning quickly and you are simply g...

fast 4 Jahre vor | 0

Beantwortet
How to modify a Simscape model before restoring the previous results of analysis
The initial state of a model, if saved using FinalState in Simulink, will require that the model have the exact same structure, ...

fast 4 Jahre vor | 0

Beantwortet
Is there a way to use Mechanics Explorer's camera object frames in the image processing algorithms?
Through release R2022b, you cannot directly output the visualization from the Mechanics Explorer to a video processing algorithm...

fast 4 Jahre vor | 0

Beantwortet
I have some questions about Stewart Platform with Simulink
If you modify the lengths of the legs, it is quite possible the controller will no longer work properly. The controller may be ...

fast 4 Jahre vor | 0

Beantwortet
Ill-conditioned cross section general flexible beam
I just tested this extrusion profile in the General Flexible Beam block and it generated no warnings in R2022b. This may work in...

fast 4 Jahre vor | 0

Beantwortet
Import of CAD models from CREO to MATLAB using Multibody link
I believe .ste is an alternate extension for a STEP file. It isn't clear to me why Creo would use a different extension in diff...

fast 4 Jahre vor | 0

Beantwortet
Simulink/Simscape/Parsim monte-carlo issue:
Seems like you have narrowed it down to a logging or buffer issue. Try eliminating nearly all the data logging. The Simulation...

fast 4 Jahre vor | 0

Beantwortet
Output 3D physical signal using simscape component
Yes. You can define position, velocity, and acceleration as separate physical signals and output a vector of physical signals f...

fast 4 Jahre vor | 0

Beantwortet
How to tune the model parameters in frequency domain - Simscape model
Generally speaking, a parameter tuning workflow is not restricted to a specific domain (time, frequency, ...). As long as your ...

fast 4 Jahre vor | 0

Beantwortet
How to begin with SimScape Multibody as a beginner and use it for BAJA SAEINDIA competition?
Here are some good starting points: Use Onramps to get started MATLAB: https://www.mathworks.com/learn/tutorials/matlab-onramp...

fast 4 Jahre vor | 0

Beantwortet
How to create a matlab script of an already created .slx file?
The MATLAB command set_param() will allow you to set the parameter of nearly any Simulink, Simscape, or Simscape Multibody block...

fast 4 Jahre vor | 0

Beantwortet
Nonlinear damper parameter sweep problem
Hi Tudor, Two things to try: Make sure the fields where you have defined the parameter are configured to be run-time parameter...

fast 4 Jahre vor | 0

| akzeptiert

Beantwortet
Simscape Multibody Link does not open MATLAB from Inventor
As mentioned above in the comments, it appears you have not linked Inventor to MATLAB. See documentation: https://www.mathwor...

fast 4 Jahre vor | 0

Beantwortet
In simmechanics how to model the shape of Carrier block of a planetary gear?
If you go into the Model Workspace for smdoc_planetary_gear_e, you will see the MATLAB code that makes the carrier geometry with...

fast 4 Jahre vor | 0

Beantwortet
Modeling Required Force for Lever Restrained by Tracking Plate
I believe you have two options: A Point On Curve Constraint combined with a Prismatic Joint would give you the motion along the...

fast 4 Jahre vor | 0

Beantwortet
Solidworks crashes by export to Sim Mechanics version 2 by using Sim Mechanics Link??!! WIN7 64 bit, SW2015 and Matlab2015b
We recommend you reinstall Simscape Multibody Link and reconnect to SolidWorks, as mentioned in the comments above. If you uplo...

fast 4 Jahre vor | 0

Beantwortet
How can i use a given C-Code to model polygonal contact between two bodies in Matlab/Simmechanics ?
Thank you for pointing out this interesting library for contact modeling. If you want us to look into this further, you will ne...

fast 4 Jahre vor | 0

Beantwortet
How can I tune my nonlinear model with Control System Tuner?
I opened your project and was able to get select blocks and set goals with the Control System Tuner. Be careful, the files you ...

fast 4 Jahre vor | 0

Beantwortet
Simmechanis real time simulation
Your model actually works just fine! The one setting you were missing was to enable the simulation pacer, which will slow down ...

fast 4 Jahre vor | 0

Beantwortet
¿como puedo realizar la comunicación entre solidworks y matlab?
Your error message shows that you made a spelling mistake. The command is smlink_linksw See this documentation page ...

fast 4 Jahre vor | 0

Beantwortet
Adding stribeck friction to a pendulum modeled with SimMechanics 2nd Generation
For custom friction at a joint, take a look at the Simscape Multibody Multiphysics Library. It contains many examples for creat...

fast 4 Jahre vor | 0

Beantwortet
How can i get "save as XML" in solidworks with simmechanics?
You need to make sure you follow these instructions carefully. https://www.mathworks.com/help/smlink/ug/installing-and-linkin...

fast 4 Jahre vor | 0