- Read the data from the file into an array, containing complex values. See textread, or the import wizard.
- Call the ifft function. This is general - it does not require any particular symmetries.
iFFT for Band-pass Measurement
1 Ansicht (letzte 30 Tage)
Ältere Kommentare anzeigen
Hi,
I have a outsource data (txt. file)of a band pass measurement which i took from a vector network analyzer. Measurement was made between 700 MHZ-1GHz The data contains 2 columns; 1. 301 measured frequency points 2. real return loss values of points. I have to transform the data from frequency domain to time domain with ifft function in order to calculate distance to fault on a coaxial cable How could i do it? My data is not complex conjugate and not symetric. Shoul i zero padding and mirroring ? What should i do to take ifft?
Thanks in advance!
0 Kommentare
Antworten (6)
David Young
am 17 Apr. 2011
Solve the problem in two stages:
jks
am 2 Mai 2011
i am working on the same kind of problem , please let me know if you have solved the case
0 Kommentare
Joh Yhan
am 9 Mai 2011
Hi cmd,
Try to replace your fstep to the following. B is the measurement bandwidth.
fstep = B / N;
0 Kommentare
AK
am 10 Jan. 2012
Well I am also working on some similar kind of problem in 5-10 GHz range which i obtained from VNA which i need to calculate ifft but assuming zero values in 5-10 GHz range will always make results go wrong so some other technique will be required to be done. please let me know if r able to find solution to this answer
1 Kommentar
Walter Roberson
am 10 Jan. 2012
We *might* be able to find a solution to this, but to do that we need you to answer the questions raised in response to your Question on this topic, http://www.mathworks.com/matlabcentral/answers/25345-ifft-of-bandpass-signal-data
Dr. Seis
am 10 Jan. 2012
You cannot reconstruct your timeseries unless you have either:
1. Complex values for both positive and negative frequencies. The real parts of the amplitudes are symmetric about 0 frequency, while the imaginary parts of the amplitudes are anti-symmetric [i.e., imag(G(f)) = -1*imag(G(-f)) ] about 0 frequency.
2. Absolute values for both positive and negative frequencies (which are symmetric about 0 frequency) and the phase-angle information associated with the real and imaginary parts.
0 Kommentare
Siehe auch
Kategorien
Mehr zu Transforms finden Sie in Help Center und File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!