(Simulink) Triggered Delay Line gone in 2014a. Replacements?

Hi, I couldn't find the Triggered Delay Line block in the (new to me) 2014a version. After a short search I've found that it is indeed gone ( link ), and using the simple non-triggerable Delay Line is recommended. However, in order to use my code properly I have to trigger the Delay Line in a non-constant frequency. Any advice about replacements? Thanks,

Answer 1

[Kaustubha Govind]

I don't know enough about the block, but perhaps you could try putting it inside a Triggered Subsystem and see if you can get the same behavior?

Answer 2

[Guy Rouleau]

Look at the doc doc page for this block:

http://www.mathworks.com/help/dsp/ref/triggereddelaylineobsolete.html

The first thing it says is:

Note: The Triggered Delay Line block is still supported but is likely to be obsoleted in a future release. We strongly recommend replacing this block with the Delay Line block.

[Nitzan]

I might be missing something, but I cannot find the block on my 2014a version. Maybe the help is not up-to-date?

Edit: I cannot find it on the 2013b version either.

[Kaustubha Govind]

Nitzan: It may have been removed from the library, but if you have existing models that contain the block, you should be able to copy it from there.