Main Content

Manage Interfaces with Data Dictionaries

Engineering systems often share interface definitions across multiple components or subsystems.

Data interfaces in System Composer™ can be stored either locally in a model or in a data dictionary, depending on the maturity of your system.

For interfaces terminology, see Define Port Interfaces Between Components.

An interface data dictionary is a consolidated list of all the interfaces and value types in an architecture and where they are used. Local interfaces on a System Composer model can be saved in an interface data dictionary using the Interface Editor.

Interface dictionaries can be reused between models that need to use a given set of interfaces, elements, and value types. Data dictionaries are stored in separate SLDD files.

For more advanced dictionary referencing techniques, see Reference Data Dictionaries.

Mobile Robot Architecture Model with Interfaces

This example shows a mobile robot platform architecture with interfaces.

Save, Link, and Delete Interfaces

By default, interfaces are stored within the architecture model and are not visible outside the model. If you are in the initial stages of building a system model, store interfaces locally to limit the number of files that need to be managed. However, if your model is mature to the point of leveraging componentization workflows like reference architectures and behaviors, storing interfaces in a data dictionary gives you the ability to share interface definitions across the model hierarchy.

Use the save interface menu to save a data interface to a new or existing data dictionary. To create a new data dictionary, select Save to new dictionary. Provide a dictionary name.

The robot interfaces dictionary shown in the interface editor window. Below the dictionary are the interfaces.

You can also add the interface definitions in the model to an existing data dictionary by selecting Link existing dictionary.

Use the interface import button to import interface definitions from a Simulink® bus object, either from a MAT-file or the workspace.

Delete a data interface from a dictionary using the delete interface button. If the data interface is already being used by ports in a currently open model, the software returns a warning message. The data interface is then removed from any ports in the open model that are associated with the data interface.

If a data interface is deleted from a dictionary upon opening another model that shares the dictionary, a warning will be presented on startup if the deleted interface is used by ports in that model. The Diagnostic Viewer offers an option to remove the deleted interface from all ports that are still using it. You can also select ports individually and delete their missing interfaces.

The 'sensor data' interface is selected. The confirm delete interface warning message says: Are you sure you want to delete interface: 'sensor data'? This will remove interface from all ports associated with that interface. This action cannot be undone. The default selection is No.

A System Composer model and a data dictionary are separate artifacts. Even when the data dictionary is linked to the model, changes to the data dictionary (a .sldd file) must be saved separately from changes to the model (a .slx file). To save changes to a linked data dictionary, use the save interface button and select Save dictionary. Once a data dictionary is saved, other models can use its interface definitions by linking to the data dictionary, allowing multiple models to share the same interface definitions.

See Also

| | | |

Related Topics