Get Started with Communications Toolbox Support Package for Xilinx Zynq-Based Radio

Prototype and test software-defined radio (SDR) systems using Xilinx Zynq-based radio

Communications Toolbox™ Support Package for Xilinx^® Zynq^®-Based Radio enables you to use MATLAB^® and Simulink^® to prototype, verify, and test practical wireless systems. Using this support package with a Xilinx Zynq-based development kit with an RF FMC card, you can work with live RF signals using single (1x1) or multiple (up to 4x4) transmit and receive streams. You can also implement custom hardware designs for your SDR applications using HDL Coder™ or Embedded Coder^®. This enables you to test your design under real-world conditions and rapidly prototype designs for mobile and embedded applications.

Installation and Configuration

Tutorials

Receive Tone Signal Using Analog Devices AD9361/AD9364

Perform a simple loopback of a complex sinusoid signal.
Transmit and Receive LTE Signals Using Analog Devices AD9361/AD9364

Generate multi-antenna LTE transmission for simultaneous transmit and receive on a single SDR device.

About Xilinx Zynq-Based Radio Design

Hardware and Software Requirements

Get an overview of supported hardware and required software products.
SDR Hardware Architecture

Overview of SDR hardware reference design.
Compatibility with Previous Releases

Learn how to update an existing design based on features removed in R2020a.

Videos

Waveform Generation Using MathWorks SDR
Generate and transmit standards-compliant and custom waveforms using MathWorks^® toolboxes and SDR connectivity.

RF Signal Capture Using MATLAB and SDR
Capture RF signals off the air using SDR hardware and Communications Toolbox support packages.