When transmitting or receiving real-world RF signals, use I/O properties and techniques to perform single and multichannel I/O, detect lost samples, apply burst mode buffering, and repeatedly transmit a waveform.
sdrrx | Create receiver System object for USRP embedded series radio hardware |
sdrtx | Create transmitter System object for USRP embedded series radio hardware |
capture | Capture contiguous RF data using USRP embedded series radio hardware |
designCustomFilter | Design custom filter for Analog Devices AD9361 RF chip |
info | Synchronize receiver or transmitter radio settings with radio hardware |
transmitRepeat | Download waveform signal to radio and repeatedly transmit it over the air |
E3xx Receiver | Receive data from USRP E3xx radio hardware |
E3xx Transmitter | Send data to USRP E3xx radio hardware |
comm.SDRRxE3xx | Receive data from USRP E3xx radio hardware |
comm.SDRTxE3xx | Send data to USRP E3xx radio hardware |
Overview of available radio channels to send and receive data.
Use a transmitter System object™ for repeated signal transmission.
Record RF signals for post-capture processing in MATLAB®.
Set sample times in receiver blocks or receiver System objects.
Set data frame length in receiver blocks or receiver System objects.
Detect underruns and overruns using the lost sample indicator.
To achieve real time performance, enable burst mode.
To determine whether you receive valid data from the radio hardware, apply conditional execution.
Transmission of a QPSK Waveform Using USRP E3xx
Transmit QPSK modulated messages onto a carrier with a specified center frequency.
Reception of a QPSK Waveform Using USRP E3xx
Receive and demodulate QPSK modulated messages.
Transmission and Reception of an Image Using WLAN Toolbox and a Single USRP E3xx
Transmit and receive encoded WLAN packets using a single SDR device.
Frequency Offset Calibration Receiver Using USRP E3xx
Determine frequency offset between SDR devices using a transmitter and a receiver.
Frequency Offset Calibration Transmitter Using USRP Embedded Series
Determine frequency offset between SDR devices using a transmitter and a receiver.
Resolve issues encountered during installation or while using the I/O mode features of the support package.