Installation and Setup
Before you can start using the Communications Toolbox™ Support Package for USRP™ Embedded Series Radio, you must:
Install the support package. See Install Support Package for USRP Embedded Series Radio.
Establish communication between the host computer and the radio hardware. See Guided Host-Radio Hardware Setup (Windows® only) or Manual Host-Radio Hardware Setup.
To work with the hardware-software co-design workflow, install additional support packages and third-party tools. See Installation for Hardware-Software Co-Design.
|Create radio object for interfacing with USRP embedded series radio hardware|
|Download SD card image or bitstream file|
|Get radio hardware information|
|Test connection between host and radio hardware|
|Interface with USRP E3xx radio hardware|
- Install Support Package for USRP Embedded Series Radio
Install the support package using the Add-On Explorer.
- Guided Host-Radio Hardware Setup
Follow an automated hardware setup process to establish communication between the host and the radio hardware (Windows only).
- Manual Host-Radio Hardware Setup
Follow a manual hardware setup process to establish communication between the host and the radio hardware.
- Setup for Two Radios Connecting to One Host
Set up two radio hardware connected to the same host.
- Installation for Hardware-Software Co-Design
Install and configure additional support packages and third-party tools required by hardware-software co-design workflow.
- Uninstall Support Packages
Uninstall the support package using the Add-On Manager.
Resolve issues encountered during installation or while using the I/O mode features of the support package.
Troubleshooting Hardware-Software Co-Design
Resolve issues encountered while using the hardware-software co-design workflow.