Get Started with Communications Toolbox Support Package for USRP Embedded Series Radio

Prototype and test software-defined radio (SDR) systems using USRP E310 or USRP E312

Communications Toolbox™ Support Package for USRP™ Embedded Series Radio enables you to use MATLAB^® and Simulink^® to prototype, verify, and test practical wireless systems. Using this support package with a USRP E310 or USRP E312 SDR, you can work with live RF signals using single (1x1) or dual (2x2) transmit and receive streams. You can also implement custom hardware designs for your SDR applications using HDL Coder™ or Embedded Coder^®. This enables you to test your design under real-world conditions and rapidly prototype designs for mobile and embedded applications.

Installation and Configuration

Tutorials

Reception of a Tone Signal Using USRP E3xx

Perform a simple loopback of a complex sinusoid signal.
Reception of a QPSK Waveform Using USRP E3xx

Receive and demodulate QPSK modulated messages.
Transmission and Reception of an Image Using LTE Toolbox and a Single USRP E3xx

Generate multi-antenna LTE transmission for simultaneous transmit and receive on a single SDR device.

About USRP Embedded Series Radio Design

Hardware and Software Requirements

Get an overview of supported hardware and required software products.
SDR Hardware Architecture

Overview of SDR hardware reference design.
Compatibility with Previous Releases

Learn how to update an existing design based on features removed in R2020a.

Videos

RF Signal Capture Using MATLAB and SDR
Capture RF signals off the air using SDR hardware and Communications Toolbox support packages.