Setup and Configuration
Install the SoC Blockset™ Support Package for Texas Instruments™
C2000™ Processors. Develop applications for the TI’s C2000 processors with the features of the SoC Blockset. Configure models to deploy to hardware boards, such as the
Delfino F2837xD and
TI Delfino F28379D LaunchPad
Simulink Configuration Parameters
|ADC Interface||Convert analog signal on ADC input pin to digital signal|
|ADC Read||Read ADC data values from ADC Interface block|
|PWM Interface||Simulate pulse width modulation (PWM) output from hardware|
|PWM Write||Send pulse width modulation (PWM) signal configuration to PWM Interface block|
|Interprocess Data Channel||Model interprocessor data channel between two processors|
|Interprocess Data Read||Receive messages from another processor using interprocess communication channel|
|Interprocess Data Write||Send messages to another processor using interprocessor data write|
Instructions to install support for TI’s C2000 MCUs.
Run an multiprocessor SoC model in external mode running on separate processors on the hardware board.
Data communication methods between two or more processes within a single processor or across multiple connected processors.
Hardware Connections (Motor Control Blockset)
Connect motors, sensors, and power supply to hardware boards.
Map the simulation parameters from interface blocks to the Peripheral Configuration tools.
Processor-in-the-Loop (PIL) simulation techniques for Texas Instruments hardware board.
Use SoC Blockset pass-though block simulation with Embedded Coder® Support Package for Texas Instruments C2000 F28M3x Concerto™ Processors blocks.