Main Content

Peripheral Management

Configure Infineon® AURIX™ TC4x microcontrollers using blocks, peripheral app and configuration parameter settings

Before communicating with target hardware, first apply block settings, hardware configuration parameters and peripheral app settings.

Blocks

expand all

Digital Port ReadRead GPIO pin(s) status
Digital Port WriteSet GPIO pin(s) status
Hardware InterruptTrigger downstream function-call subsystem from an interrupt service routine
EncoderMeasures rotation of motor in ticks
PWMGenerate pulse width modulated waveforms
QSPIWrite data to and read data from an SPI peripheral device
TMADCMeasure voltage of an analog input pin
Memory CopyCopy to and from memory section
Byte PackConvert input signals to 8-, 16-, or 32-bit vector
Byte UnpackUnpack 8-, 16-, or 32-bit input vector to multiple output vectors
Byte ReversalReverse little-endian data for big-endian processor

Tools

Hardware MappingMap tasks and peripherals in a model to hardware board configurations
TasksMap tasks in the Infineon AURIX to interrupt service routines on the hardware board
Digital Port Read Peripheral ConfigurationMap Digital Port Read peripherals in the Infineon AURIX model to peripheral registers in the MCU
Digital Port Write Peripheral ConfigurationMap Digital Port Write peripherals in the Infineon AURIX model to peripheral registers in the MCU
Encoder Peripheral ConfigurationMap encoder peripherals in the Infineon AURIX model to peripheral registers in the MCU
PWM Peripheral ConfigurationMap PWM peripherals in theInfineon AURIX model to peripheral registers in the MCU
QSPI Peripheral ConfigurationMap QSPI peripherals in the Infineon AURIX model to peripheral registers in the MCU
TMADC Peripheral ConfigurationMap TMADC peripherals in the Infineon AURIX model to peripheral registers in the MCU

Model Settings

Model Configuration Parameters

Topics