Model Configuration Parameters

Update the configuration parameters for a Simulink^® model that you create, before simulating or deploying the model to the controller.

In the Simulink window, click Model Settings in the Modeling tab to open the Configuration Parameters dialog box and select the target hardware in the Hardware board field. You can also press Ctrl+E to open the Configuration Parameters dialog box.

Hardware Implementation Pane Overview

Configure hardware board to run Simulink models.

1. In the Simulink Editor, select Simulation > Model Configuration Parameters.

2. In the Configuration Parameter dialog box, click Hardware Implementation.

3. Set the Hardware board parameter to Infineon AURIX TC4x - TriBoards.

4. The parameter values under Hardware board settings are automatically populated to their default values.

   You can optionally adjust these parameters for your particular use case.

5. To apply the changes, click Apply.

Target hardware resources

Device

Parameter	Description	Default Value
Series	Displays the device series for the selected hardware board.	TC49x
Step	Displays the device step for the selected hardware board.	A
Package type	Displays the device packaging type for the selected hardware.	BGA
Package class	Displays the number of programmable pins for the selected hardware board/microcontrollers. You can set the package class to 436 or 292.	436
Pinout	Displays the pinout type for the selected hardware board. You can set the package class to STD or COM.	STD
Enable program cache #	Select the program cache.	on
Enable data cache #	Select the data cache.	off
Enable CPU#	Select the CPU.	disabled
Enable PPU	Select the PPU.	disabled

Build Options

Parameter	Description	Default Value
Build action	Define how Embedded Coder® responds when you build your model.	Build, load, and run
Disable parallel build	Select to compile the generated code and driver source codes in parallel order for faster build and deployment speed.	off
Enable force rebuild of static library	Select to force rebuild of the static driver library.	off
Boot From	Option to specify if the application has to load to the RAM or ROM.	RAM
Use custom linker command file	Indicates that the custom linker command file must be used during the build action.	enabled
Linker file	The path to the memory description file required during linking.	off

Clocking

Parameter	Description	Default Value
External oscillator (MHz)	Oscillator frequency used in the processor.	20
CPU Clock (MHz)	CPU clock frequency of the microcontrollers on the target hardware	400

Connectivity

Parameter	Description	Default Value
Connectivity interface	Select the type of communication interface for simulation.	Serial (ASCLIN0)
Port	Select the serial communication interface module.	empty
Baud rate	Select the baud rate of the serial communication port.	921600