jc_0110: Direction of block
Sub ID Recommendations
NA-MAAB — No recommendations
JMAAB — a
Sub ID a
Blocks shall be arranged so the output is to the right.
When a Delay is used in a feedback loop, the output can be to the left.
The model is arranged so that the output is to the right. The output of the Delay block is to the left.
The block is arranged so the output is to the left.
Sub ID a:
Signal flow can be difficult to understand if the direction of the signals is not consistent.
Model Advisor check: Check block orientation (Simulink Check)
JMAAB guideline jc_0110, which is available in Control Algorithm Modeling Guidelines Using MATLAB, Simulink, and Stateflow on the MathWorks® website.