Consecutive zero-crossings violation

Description

Select the diagnostic action to take when Simulink^® software detects that the number of consecutive zero crossings exceeds the specified maximum.

Category: Diagnostics

Settings

Default: error

none

Simulink software takes no action.

warning

Simulink software displays a warning.

error

Simulink software terminates the simulation and displays an error message.

Tips

• If you select warning or error, Simulink software reports the current simulation time, the number of consecutive zero crossings counted, and the type and name of the block in which Simulink software detected the zero crossings.

• For more information, see Preventing Excessive Zero Crossings.

Dependency

This diagnostic applies only when you are using a variable-step solver and the zero-crossing control is set to either Enable all or Use local settings.

Command-Line Information

Parameter: MaxConsecutiveZCsMsg

Value: 'none' | 'warning'

Default: 'error'

Recommended Settings

Application	Setting
Debugging	No impact
Traceability	No impact
Efficiency	No impact
Safety precaution	warning or error

Related Topics

• Zero-Crossing Detection
• Zero-crossing control
• Number of consecutive zero crossings
• Time tolerance
• Diagnosing Simulation Errors
• Model Configuration Parameters: Diagnostics