Cyclers
R2026bPerform constant current charging, constant voltage charging, or constant current discharging by using cyclers.
Simscape Blocks
 | Charger | Ideal battery charger (Since R2022b) |
 | Discharger | Ideal battery discharger (Since R2022b) |
 | Cycler | Ideal galvanostat, potentiostat, or cycler (Since R2022b) |
Featured Examples
Charge Battery Module with Charger Block
Charge a battery module using a constant-current step followed by a constant-voltage step. This is a CC-CV profile. The battery simulation utilizes a Simscape™ Battery™ Charger block. At the start of the simulation, the battery module has a state of charge (SOC) of 10%. The Charger block performs a constant-current (CC) charging until it reaches the predefined module voltage limit of 4.1 V. The block then switches to a constant-voltage (CV) control step where the current gradually decreases until it reaches a threshold of 0.5 A, specified in the Current Threshold parameter. The charging procedure stops once the current reaches the designated threshold.
