Run on Custom Hardware
Run external mode simulations
The Run on Custom Hardware app enables you to run external mode simulations on your development computer or other target hardware. In an external mode simulation, you can tune parameters in real time and monitor target application signals.
To run an external mode simulation, you:
Build the target application on your development computer.
Deploy the target application to the target hardware.
Connect Simulink® to the target application that runs on the target hardware.
Start execution of generated code on the target hardware.
Using the app, you can:
Perform the steps separately or with one click.
Register custom launchers that deploy the target application.
Open the Run on Custom Hardware App
On the Apps tab, click Run on Custom Hardware. Or, on the C Code tab, select Verify Code > Run on Custom Hardware.
Run XCP External Mode Simulation
For an example that uses the Run on Custom Hardware app, see Run XCP External Mode Simulation on Development Computer.
- External Mode Simulation by Using XCP Communication
- External Mode Simulation with TCP/IP or Serial Communication