Main Content

Board IP address

IP address of board

Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Target hardware resources / Ethernet

Description

Use this option for setting the IP address of the board. If the default board IP address is in use by another device, you would need to change the address.

Settings

192.168.1.102 (default)

Use this option for setting the IP address of the board. If the default board IP address is in use by another device, you would need to change the address.

If so, change the board IP address according to these guidelines:

  • The subnet address, typically the first 3 bytes of the board IP address, must be the same as the first 3 bytes of the host IP address.

  • The last byte of the board IP address must be different from the last byte of the host IP address.

  • The board IP address must not conflict with the IP addresses of other computers. For example, if the host IP address is 192.168.8.2, then you can use 192.168.8.3, if available.

Recommended Settings

No recommendation.

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2016a