Main Content

Supported IDE Platforms

IDEs Supported for Structured Text Generation

The Simulink® PLC Coder™ product is tested with these IDE platforms:

  • CODESYS Version 2.3

  • CODESYS Version 3.5 (SP4 or later)

  • B&R Automation Studio® 3.0

  • B&R Automation Studio 4.0

  • Beckhoff® TwinCAT® 2.11

  • Beckhoff TwinCAT 3

  • MITSUBISHI ELECTRIC MELSOFT GX Works3

  • PHOENIX CONTACT Software MULTIPROG® 5.5.

    PHOENIX CONTACT Software GmbH was previously called KW-Software GmbH. The Simulink PLC Coder software supports only the English version of MULTIPROG target IDE.

  • OMRON® Sysmac® Studio Version 1.04, 1.05, 1.09 or 1.12

  • OMRON Sysmac Studio IEC61131-10 XML Version 1.30 and later.

  • Phoenix Contact® PC WORX™ 6.30

    The Simulink PLC Coder software supports only the English version of Phoenix Contact PC WORX target IDE.

  • Bosch Rexroth IndraWorks version 14V22 IDE

  • Rockwell Automation® RSLogix™ 5000 Series V20

    Simulink PLC Coder can generate code for Add-On instructions (AOIs) and routine code. The software supports automatic import and verification of generated code only for the RSLogix IDEs and not the Studio 5000 IDE.

  • Rockwell Automation Studio 5000 Version 21 up to version 35

  • Siemens® SIMATIC® STEP® 7 V5.5

    The Simulink PLC Coder software assumes that English systems use English S7 and that German systems use German S7.

  • Siemens TIA Portal V19

  • Generic

  • PLCopen XML

  • Selectron CAP1131 V5.12

  • Schneider Electric - EcoStruxure Control Expert

For a list of supported IDEs and platforms, see Supported IDEs at the MathWorks® website.

IDEs Supported for Ladder Diagram Code Generation

The Simulink PLC Coder product is tested with these IDE platforms:

  • Rockwell Automation Studio 5000 Logix Designer