Use these blocks for protection in your electronic, mechatronic, or electrical power system.
|Circuit Breaker||Single-pole single-throw circuit breaker|
|Circuit Breaker (Three Phase)||Three-phase circuit breaker controlled by external signal|
|Circuit Breaker (with arc)||Single-pole single-throw circuit breaker with Mayr arc representation|
|DPDT Switch||Double-pole double-throw switch|
|DPST Switch||Double-pole single-throw switch|
|Fuse||Fuse that protects against excessive current|
|Relay||Switching relay with associated delay|
|SPDT Switch||Single-pole double-throw switch|
|SPDT Switch (Three-Phase)||Three-phase single-pole double-throw switch|
|SPST Switch||Single-pole single-throw switch|
|SPST Switch (Three-Phase)||Three-phase single-pole single-throw switch|
Apply Simscape™ modeling rules when you build electronic, mechatronic, and electrical power system networks using Simscape Electrical™.
Connect three-phase blocks using composite ports for three-phase lines or expanded ports for single-phase lines.
Switch between a physical signal port and an electrical conserving port on a Simscape Electrical block.