The Simscape language lets you define custom components as textual files, complete with parameterization, physical connections, and underlying equations. Topics on this page provide detailed information on declaring component parameters, variables, and connections. For other aspects of defining custom components, see Component Equations, Discrete Events and Mode Charts, and Composite Components.
To get started with writing custom components, see Creating Custom Components, which provides an overview of the general workflow. At the bottom of this page, topics listed under Reference Application Components provide complete component examples with detailed explanations that illustrate the techniques used in each case.
|Control appearance of Simscape block based on the component|
|Establish relationship between component Through variables and nodes|
|Component model keywords|
|Define component inputs, that is, Physical Signal input ports of block|
|Define component nodes, that is, conserving ports of block|
|Define component outputs, that is, Physical Signal output ports of block|
|Specify component parameters|
|Define domain or component variables|
Declarations and Branches
- Declaring Domains and Components
Declaration section of domain and component files: purpose, definitions, rules, member summaries.
- Declare a Spring Component
The following diagram shows a network representation of a mass-spring-damper system, consisting of four components (mass, spring, damper, and reference) in a mechanical rotational domain.
- Declare Component Parameters
Component parameters let you specify adjustable parameters for the Simscape block generated from the component file.
- Declare Component Nodes
Component nodes define the conserving ports of a Simscape block generated from the component file.
- Declare Component Inputs and Outputs
In addition to conserving ports, Simscape blocks can contain Physical Signal input and output ports, directional ports that carry signals with associated units.
- Declare Component Variables
When you declare Through and Across variables in a component, you are essentially creating instances of domain Through and Across variables.
- Define Relationship Between Component Variables and Nodes
How to connect Through and Across variables declared in a component file to the domain Through and Across variables.
- Declaration Functions
Use MATLAB® functions to compute derived parameter values or initialize variables.
- Defining Component Variants
Use conditional sections to define variants within component file.
- Defining Conditional Visibility of Component Members
Use annotation section to define conditional visibility of ports and parameters for component variants.
Reference Application Components
- Model Linear Resistor in Simscape Language
Overview of how modeling in Simscape language works, using a linear resistor as an example.
- Mechanical Component — Spring
The following file,
spring.ssc, implements a component called
- Electrical Component — Ideal Capacitor
The following file,
ideal_capacitor.ssc, implements a component called
- No-Flow Component — Voltage Sensor
The following file,
voltage_sensor.ssc, implements a component called
- Grounding Component — Electrical Reference
The easiest way to implement a grounding component is to use a connection to an implicit reference node.
- Composite Component — DC Motor
This example shows how to implement a DC motor model by means of a composite component.
- Triggered Delay Component
This example shows how to implement a triggered delay component.
- Enabled Component
This example shows how to implement a component similar to a Simulink® enabled subsystem.
- Switch with Hysteresis
This example shows how to model a component by using mode charts and enumerations.
- Component Variants — Series RLC Branch
This example shows how to implement variants within a component file by using conditional sections.
- Component Variants — Thermal Resistor
This example shows how to implement conditional visibility of component ports, parameters, variables, and a conditional custom block icon.