Connect Arduino to MATLAB over USB

Check if the Arduino^® board is connected to MATLAB^® and configured. If the board needs configuration, click Hardware Setup and follow the onscreen instructions to upload the Arduino server and set up the Arduino to communicate with MATLAB.

• Board — Select the Arduino Board

• Port — Select the USB port.

• Custom Name — You may select a custom name for your Arduino.

After you have specified values for these parameters, click Confirm Parameters. If the connection is successful, your Arduino board appears in the Device List. Go back to the Devices tab at any time by clicking Cancel.

If the connection fails:

• Ensure that the Arduino board is connected to host system.

• Ensure that the USB server has been successfully uploaded into the Arduino board.

• Ensure that the Board and the Port fields are correct.

For further information, see Arduino USB, Bluetooth, and Wi-Fi Connection Failure.