Installation and Setup
R2026bBefore you can interact with the supported FPGA and SoC devices and add-on cards using SoC Blockset™ for AMD features, you must:
Install the SoC Blockset Support Package for AMD FPGA and SoC Devices. For details, see Install Support for AMD FPGA and SoC Devices.
Connect and set up your hardware board by using the Hardware Setup tool. For details, see Set Up AMD FPGA and SoC Devices.
Tools
| Hardware Setup | Setup, connect, and configure your hardware boards, development kits, or devices (Since R2022b) |
Functions
hdlHardwareSetup | Open the Hardware Setup tool (Since R2025a) |
Topics
Supported Hardware Boards
- Supported Third-Party Tools and Hardware
List of supported third-party tools and hardware devices.
Install Hardware Support
- Install Support for AMD FPGA and SoC Devices
Instructions to install support for AMD® FPGA and SoC devices.
Hardware Setup
- Set Up AMD FPGA and SoC Devices
Configure and verify your hardware connection, using the hardware setup tool.
- Set Jumper Switches
Configure the jumpers or switches on the Zynq® SoC or Versal® board so that you can use it as a peripheral device. - Set Up Custom Boards Using the Hardware Setup
Configure custom hardware board using Hardware Setup. (Since R2026a)
Custom Linux Support
- Build Linux Image for AMD Kria KR260 Robotics Starter Kit Using PetaLinux Tool
Step-by-step process for building a custom Linux image for Kria board. (Since R2026a) - Build PetaLinux Image for AMD ZCU216 RFSoC Development Kit
Step-by-step process for building a PetaLinux image for AMD RFSoC devices. (Since R2026a)
Requirements for Advanced Applications
- Software and Hardware Requirements for Radio Applications
Get an overview of required software products and supported hardware for radio applications. - Software and Hardware Requirements for Vision Applications
Supported products, EDA tools, and boards for video capture and deep learning designs.
Troubleshooting
Configure Network Interface Card (NIC) on Development Computer
Configure a Network Interface Card (NIC) on development computer to connect to hardware board.
Command-Line Session for AMD SoC Devices
Open a serial command-line session with AMD SoC platform.
Send PING Request to AMD SoC Devices
Process to PING an AMD SoC devices connected to your development computer.
