What to Do After Installation

After you install the Embedded Coder^® Support Package for Infineon^® AURIX™ TC3x Microcontrollers and configure the hardware connection, you can:

• Model algorithms in Simulink^® and generate code to test performance. For more information, see Getting Started with Embedded Coder Support Package for Infineon AURIX TC3x Microcontrollers, Getting Started with Multicore Modeling and Targeting for Infineon AURIX TC3x Microcontrollers, Monolithic Modeling for Infineon AURIX Microcontrollers, and SoC-Based Multicore Modeling Workflow for Infineon AURIX Microcontrollers.

• Adjust the block parameters, peripheral configuration, and set hardware configuration parameters. For more information, see Peripheral Management.

• Explore the motor control application examples that come with the support package. For more information, see Application Examples.

• Perform parameter tuning and data logging while the model is running on the target hardware in real time. For more information, see Signal Monitoring and Parameter Tuning Using Infineon AURIX TC3x Microcontrollers.

• Perform PIL verification process to ensure that the behavior of the deployment code matches the design. For more, see Code Verification and Validation with PIL and Model Reference PIL Simulation.

In addition, the section Common Problems and Fixes can help you troubleshoot issues and any errors you could encounter.