Triggered Signal From Workspace
Import signal samples from MATLAB workspace when triggered
Libraries:
DSP System Toolbox /
Signal Operations
Description
The Triggered Signal From Workspace block imports signal samples from the MATLAB® workspace into the Simulink® model when triggered by the control signal at the input port (). The Signal parameter specifies the name of a MATLAB workspace variable containing the signal to import, or any valid MATLAB expression defining a matrix or 3-D array.
Examples
Queues
Push and pop elements from a queue using a Queue block with a system of selection switches.
Ports
Input
trigger — Trigger signal
scalar | vector | matrix
Triggering input signal, specified as a scalar, vector, or matrix. This port is labelled with .
Data Types: single
| double
| int8
| int16
| int32
| int64
| uint8
| uint16
| uint32
| uint64
| Boolean
| fixed point
Output
Port_1 — Signal imported from workspace
scalar | vector | matrix | 3-D array
The block outputs the signal imported from the workspace when triggered by the control signal at the input port.
When the Signal parameter specifies an M-by-N matrix (M≠1), each of the N columns is treated as a distinct channel. You specify the frame size in the Samples per frame parameter, Mo. When triggered, the block outputs an Mo-by-N matrix containing Mo consecutive samples from each signal channel. For convenience, an imported row vector (M=1) is treated as a single channel, so the output dimension is Mo-by-1.
When the Signal parameter specifies an
M-by-N-by-P
array, the block generates a single page of the array (an
M-by-N matrix) at each trigger
time. The Samples per frame parameter must be set
to 1
.
Data Types: single
| double
| int8
| int16
| int32
| int64
| uint8
| uint16
| uint32
| uint64
| Boolean
| fixed point
Parameters
Signal — Signal to import
1:10
(default) | MATLAB workspace variable | MATLAB expression
The name of the MATLAB workspace variable from which to import the signal, or a valid MATLAB expression specifying the signal.
When the Signal parameter specifies an M-by-N matrix (M≠1), each of the N columns is treated as a distinct channel. You specify the frame size in the Samples per frame parameter, Mo. When triggered, the block outputs an Mo-by-N matrix containing Mo consecutive samples from each signal channel. For convenience, an imported row vector (M=1) is treated as a single channel, so the output dimension is Mo-by-1.
When the Signal parameter specifies an
M-by-N-by-P
array, the block generates a single page of the array (an
M-by-N matrix) at each trigger
time. The Samples per frame parameter must be set to
1
.
Trigger type — Type of triggering event
Rising edge
(default) | Falling edge
| Either edge
The type of event that triggers the block to execute.
Rising edge
triggers execution of the block when the trigger input rises from a negative value to zero or a positive value, or from zero to a positive value.Falling edge
triggers execution of the block when the trigger input falls from a positive value to zero or a negative value, or from zero to a negative value.Either edge
triggers execution of the block when either a rising or falling edge occurs.
Initial output — Initial output value
0
(default) | scalar | vector | matrix
The value to output until the first trigger event is received. Between trigger events, the block holds the output value constant at its most recent value (that is, no linear interpolation takes place). For single-channel signals, the Initial output can be a vector of length Mo or a scalar to repeat across the Mo elements of the initial output frames. For matrix outputs (Mo-by-N or M-by-N), the Initial output parameter value can be a matrix of the same size or a scalar to be repeated across all elements of the initial output.
Samples per frame — Samples per frame
1
(default) | positive integer
The number of samples, Mo, to
buffer into each output frame specified as a positive integer scalar. This
value must be 1
when you specify a 3-D array in the
Signal parameter.
Form output after final data value by — Values to output after final imported signal value
Setting to zero
(default) | Holding final value
| Cyclic repetition
Specifies the output after all of the specified signal samples have been generated.
When you specify
Setting To Zero
, the block generates zero-valued outputs for the duration of the simulation after generating the last frame of the signal.When you specify
Holding Final Value
, the block repeats the final sample for the duration of the simulation after generating the last frame of the signal.When you specify
Cyclic Repetition
, the block repeats the signal from the beginning after generating the last frame. When there are not enough samples at the end of the signal to fill the final frame, the block zero-pads the final frame as necessary to ensure that the output for each cycle is identical. For example, the ith frame of one cycle contains the same samples as the ith frame of any other cycle.
The block does not extrapolate the imported signal beyond the last sample.
Block Characteristics
Data Types |
|
Direct Feedthrough |
|
Multidimensional Signals |
|
Variable-Size Signals |
|
Zero-Crossing Detection |
|
Extended Capabilities
C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.
Version History
Introduced before R2006a
MATLAB-Befehl
Sie haben auf einen Link geklickt, der diesem MATLAB-Befehl entspricht:
Führen Sie den Befehl durch Eingabe in das MATLAB-Befehlsfenster aus. Webbrowser unterstützen keine MATLAB-Befehle.
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
How to Get Best Site Performance
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)