Star Strider
Hic sunt dracones! PROFESSIONAL: Physician (M.D.): Diplomate of the American Board of Internal Medicine; M.Sc. Biomedical Engineering: Instrumentation, Signal Processing, Control, System Identification, Parameter Estimation NON-PROFESSIONAL: Amateur Extra Class Amateur Radio Operator; Private Pilot, Airplane Single Engine Land, Instrument Rating Airplane; Gamer NOTE: I do not respond to emails or personal messages, unless they are about my File Exchange contributions. Time Zone: UTC-7 (Standard); UTC-6 (Daylight Savings/Summer)
Statistiken
RANG
3
of 290.037
REPUTATION
65.976
BEITRÄGE
0 Fragen
20.062 Antworten
ANTWORTZUSTIMMUNG
0.00%
ERHALTENE STIMMEN
9.276
RANG
2.559 of 19.625
REPUTATION
649
DURCHSCHNITTLICHE BEWERTUNG
4.70
BEITRÄGE
5 Dateien
DOWNLOADS
36
ALL TIME DOWNLOADS
5997
BEITRÄGE
0 Beiträge
BEITRÄGE
0 Öffentlich Kanäle
DURCHSCHNITTLICHE BEWERTUNG
BEITRÄGE
0 Highlights
DURCHSCHNITTLICHE ANZAHL DER LIKES
Feeds
How to draw an inclined cone with an ellipse base in the three-dimensional XYZ coordinate system?
Start with the cylinder function, then modify it to create the sort of tilted cone you want. Example — r = [1 0]; ...
etwa eine Stunde vor | 0
Why does my plot line appear outside the axes?
You may have inadvertently turned the Clipping property to 'off' (although that doesn’t explain the absence of the extension of ...
etwa 2 Stunden vor | 0
How to use integral when limits are anonymous functions
‘How do I overcome this?’ First, use the int function to integrate symbolic functions. It will return a numeric result if i...
ein Tag vor | 0
Swapping X and Y Axis of a Figure for a One-layer Matrix
I can’t run your code. Try this — contourf(E.') instead. That will transpose the matrix. so it should display the way y...
ein Tag vor | 1
Generate a time series from power spectral density
In that event, just create a sine curve of the appropriate frequency or frequencies as determined by the PSD result. This will ...
ein Tag vor | 0
| akzeptiert
Trying to find the integral under the curve at a certain bandwidth
Try this — clear all close all clc L=10; n=1.45; c=2.9979e8; dt = 6e-12; T=10*2*L*n/c; t = (-T/2/dt:1:T/2/dt)*dt; N...
2 Tage vor | 0
Prepare Fourier Amplitude Spectrum from ground motion record (Peak-Acceleration vs time-period)
Perhaps this — T1 = readtable('india.19911019...at_output.txt'); T1.Properties.VariableNames = {'Peak Acceleration','Time'} ...
2 Tage vor | 0
Other ways to improve fft amplitude
Another option may be to zero-pad the fft using: Fs = signal_sampling_frequency L = signal_length; NFFT = 2^nextpow2(L) FTs...
2 Tage vor | 1
| akzeptiert
How can I write a set of first order ODEs with two variables?
Try something like this — syms D g m t x(t) y(t) Y dx = diff(x); d2x = diff(dx); dy = diff(y); d2y = diff(dy); DEqn1 ...
3 Tage vor | 1
Recover signal from single-sided spectrum using ifft
The problem appears (to me) that you are using the absolute value (‘P2’) of the fft result. This essentially discards the phase...
3 Tage vor | 0
FFT to a simple sine wave
I am not certain what the independent variable axis is (the label is cut off), however if you want a power spectral density plot...
4 Tage vor | 0
I am recieving an error in creating the solution however it still prints a result.
In the last iteration of the loop, the results are all empty. One way to avoid the error is to test for at least one field to ...
5 Tage vor | 0
| akzeptiert
Solving ODE using laplace
Your code looks correct to me, and when I checked the result with dsolve, its solution agreees with yours — syms t s y(t) Y X ...
5 Tage vor | 0
Old Matlab example of 1D FFT filter
The only function that I am aware of that might do what you want is the fftfilt function (introduced before R2006a). It require...
6 Tage vor | 0
| akzeptiert
Plot a vector with a given angle against the y-axis
Another approach — thetad = 280; % Desired Angle (Guessing Value) x...
6 Tage vor | 0
Decreasing bin size FFT options for increased resolution
You can minimise the spectral leakage by windowing the fft (except for a rectangular window, which is the default if no others a...
7 Tage vor | 0
| akzeptiert
Could anyone explain the example provided in thr help for understanding the use of fft?
This calculation of the frequency vector for the displayed Fourier transform is not the easiest to understand: f = Fs*(0:(L/2)...
8 Tage vor | 0
| akzeptiert
Need help in assigning frequency and normalising amplitude to the fft plot
There may be several approaches to your problem. One of them is this — clear all close all clc L=10; n=1.45; c=2.9979e...
8 Tage vor | 0
| akzeptiert
Left and Right side have different elements
You need to subscript ‘t’. Then, it works — t = 0:0.01:4; % Timesteps for robotic arm motion for i = 1:length(t...
9 Tage vor | 0
Error using Odearguments - vector must return a column
You only have one differential equation, so only one initial condition is necessary. %r_H2= -(-Rds - Rwf - Rh); %Rd = kds*(C...
9 Tage vor | 0
| akzeptiert
I want to change the symbolic variables in my matrix to numbers
Use the fplot function — clear all ; close all; close ; clear syms s Expr = (sin(s)); F1 = int(Expr) syms n expr2 = 1/n ...
9 Tage vor | 0
| akzeptiert
How to remove (or isolate) side peaks except main peak after FFT
Using: NFFT = 2^nextpow2(numel(signal)) and a window function (for example hann) in the fft call could improve the fft result...
9 Tage vor | 0
Trying to combine two IR spectra where x is wavenumber (cm-1) and y is transmittance (0 to 1), having trouble.
It would help to have the data. The best way is probably to interpolate the longer series to the length of the shorter series...
10 Tage vor | 0
Tornado chart with colormap gradient
Perhaps something like this — % Data data = [0.496; % Electrical conversion efficiency 0.426; % Biogas efficiency val...
10 Tage vor | 0
I'm trying to find displacement from acceleration datas
Your original ac celeration data have a trend, and you are integrating the trend. Use the detrend function tto remove it (alter...
10 Tage vor | 0
Fitting an anonymous function: Debye Callaway Model
I do not have your data so I cannot run your code. However it is always appropriate to compltely vectorise objective function...
11 Tage vor | 0
How to Reshape a Matrix into a Cell
Transpose the row vector, call reshape, then transpose that result — syms R11 R12 R13 R21 R22 R23 R31 R32 R33 k = 1; timest...
11 Tage vor | 0
Curve fit autocatalytic model
if ‘x’ is greater than 1 and ‘n’ is not an integer, the result will be complex. Example — k = rand m = rand n = rand x ...
11 Tage vor | 0
fsolve function not solving nonlinear equations, I had observed "Invalid datatype. Options argument must be created with OPTIMOPTIONS"; could you assist me, pse
One problem is that fsolve wants the initial parameter estimates as a single vector, and the third argument is the ‘options’ str...
11 Tage vor | 0
| akzeptiert
apply hanning window for signal processing
I do not understand your code, so I am not certain where to suggest adding the hann call in that context. (I specifically do no...
11 Tage vor | 0