Create Physical Modeling connector port for subsystem
The Connection Port block, placed inside a subsystem composed of SimPowerSystems™ blocks, creates a Physical Modeling open round connector port on the boundary of the subsystem. Once connected to a connection line, the port becomes solid . Once you begin the simulation, the solid port becomes an electrical terminal port, an open square .
You connect individual SimPowerSystems blocks and subsystems made of SimPowerSystems blocks to one another with SimPowerSystems connection lines, instead of regular Simulink® signal lines. These are anchored at the open, round connector ports . Subsystems constructed of SimPowerSystems blocks automatically have such open round connector ports. You can add additional connector ports by adding Connection Port blocks to your subsystem.
This field labels the subsystem connector port created by the
block. Multiple connector ports on the boundary of a single subsystem
require different numbers as labels. The default value for the first
Choose which side of the parent subsystem boundary the port
is placed on. The choices are
The default is